Cold Weather Green  LED Exit Sign with Battery - Two Circuit 

The WL-VEX-G-2C Green LED is an exceptional blend of style and economy for any outdoor application. A fully-gasketed lens and housing enable the WL-VEX-G-2C to perform well in wet location installations.

Features

• Ideal for wet location applications in extreme conditions
• Rugged, injection-molded UL94 V-0 flame retardant, hightemperature polycarbonate housing
• Impact-resistant, polycarbonate shield offers extreme protection
• One-piece, molded, weather-proof silicone gasket
• Charge rate/power ON LED indicator light with test button
  
• Low voltage disconnect eliminates deep discharge
• Brown-out, short circuit and voltage surge protection
• Overcharge protection
• Maintenance-free NiCad battery
  
• Universal Mounting - Ceiling, back or end mount
• Constant, uniform illumination by long-life, high intensity, red or green LEDs
• Universal J-Box mounting system
• Fully-illuminated 6" characters with 3/4" stroke
  
• Chevron-style, universal arrow
  
• Standard finishes: Black, white or gray
  
  Construction
  Rugged, injection-molded UL94 V-0 flame retardant, high-temperature polycarbonate housing is available in white, black, gray or gray with white face with impact-resistant, polycarbonate lens. Universal knockouts on back plate for wall mount and polycarbonate canopy included for top or end mounting.
  Stencil letters are 6 high with 3/4 stroke, with minimum of 100 ft viewing distance rating as required by UL924 standard.
  
  
  Brownout Circuit
  The brownout circuit monitors the flow of AC current to the unit and triggers the emergency lighting system once a set reduction of AC power occurs. This dip in the voltage will cause many fixtures to extinguish causing loss of normal lighting even though a total power failure has not occurred.
  
  
  Installation
  Simple snap together universal design allows for faceplate and backplate to be fully interchangeable. Mounting canopy is supplied with all signs and snaps into enclosure with two positive locking tabs.
  
  Wet Location Rated (Standard)
  Wet location rated fixtures can be used in applications where moderate contact with water can be expected. Wet-location rated products are designed to be reasonably watertight; they require a seal around the base, canopy, or bracket to protect the electrical service from moisture.
  
  
  Two-Circuit Operation - (Option: 2CI)
  Two circuit operation features for emergency lighting allows the dual input of power sources for units less battery (AC only). The purpose of this feature is to provide the compatibility of our emergency units in applications where inverters or alternate back up power sources are utilized.
  
  Tamper Resistant Hardware - (Option: TRH)
  Tamper resistant hardware adds an additional layer of protection to the unit, preventing unwanted access to the interior of the unit or removal of the face plates.
  
  Conformance to codes & Standards
  The WL-VEX-G-2C Series is UL listed and meets or exceeds the following: UL 924, NEC requirements and NFPA 101.
  
  Warranty
  Any component that fails due to manufacturers defect is guaranteed for 5 years with a separate 5 year pro-rated warranty on the battery. The warranty does not cover physical damage, abuse or acts of God. Manufacturer reserves the right to charge for such repairs if deemed necessary.
  
  Dimensions
  Exit Sign - Length 12.4", Height 8.4", Width 2.5"
  Ceiling Canopy - Length 5.5", Width 4.4", Height.09"
  
  

  Specification Sheet Click Here